We then add boundaries delineated forward/backward facing reflected shock, Mechanical equilibrium, M2=1 and reflected shock strong/weak separating conditions on the (M0,q1) map of shih(2004). This is followed by systematically investigating multiply possible three shock theoretical solutions of steady Mach reflections in perfect triatomic gases. Pressure-deflection shock polar solutions are used to help illustrate different solution behaviors of these theoretical three-shock solutions. M0 is flow Mach no. upstream of incident shock, M1 is flow Mach no. downstream of incident shock, M2 is flow Mach no. downstream of reflected shock,q1 is flow deflection downstream of incident shock.
随后本文由石(2004)论文中加入前后分界、机械平衡、M2=1及强弱分界条件，然后有系统地探讨三原子分子理想气体(r=1.2857 )稳态马赫反射参震波理论多重解之交点及其对应之压力-转折角震波极图解，并建构出此三原子分子理想气体稳态马赫反射流场三震波十阶多项式理论解於(Mo，q1)平面上之解域图，其中M0为入射震波上游流场马赫数，M1为入射震波下游流场马赫数，M2为入射震波下游流场马赫数，q1为入射震波下游流场转折角。
Experimental investigation indicates that shock wave velocity and shock wave pressure of beginning which were produced with aluminize RHTL were smaller than that of insensitive RDX in steel plate, however, attenuating velocity of shock wave velocity and shock wave pressure which were produced under contact explosion with aluminize RHTL were quciker than that of insensitive RDX in steel plate, when steel- plate had been separately operated under contact explosion with insensitive RDX and aluminize RHTL, and shock wave press had changed suddenly in the interface between steel and aluminum, In the circumstances, the shock wave velocity had ascended suddenly and shock wave pressure had descended suddenly.
实验研究表明：RHTL炸药爆炸加载钢板下，介质中的冲击波初始速度和初始压力相对RDX较小，衰减相对较快；钝化RDX和含铝炸药RHTL分别作用于钢铝复合板时，在分界面处冲击波速度和压力都发生突越，冲击波速度突跃，冲击波压力突降。
In this paper, the bump patterns for flip-chip packages are discussed first, then an experiment is setup to study the dispensing phenomena for different bump patterns, and the CAE software is used to analyze and identify with experiment mutually. From these thorough comparisons and analytical analysis, the existence of channel could slow down the flow, the high density of bump could speed up the flow, and it could avoid the air trap by modified the bump and channel's arrangement on flip-chip package. Then flows in rectangular microchannels driven by capillary force and gravity are discussed; furthermore, the theoretical model of flow in microchannel driven by capillary force and gravity is formulated from the Navier-Stokes equations.
本文首先针对覆晶底部充填进行相关理论推导、实验与模拟，探讨不同凸块配置模型所造成的波前不平滑现象对底部充填流动的影响；即依据相关参数建立模型进行底部充填实验，同时以CAE(Computer-Aided Engineering)模流分析软体进行模拟，在完成理论探讨、实验与模拟分析之后，交叉比较理论、实验与模拟分析结果，归纳出影响底胶充填流动之因素，由结果显示在凸块密集度较高的区域，凸块可以帮助流动，但是在凸块区后方的沟槽区域则因为凸块区所提供之流量不足，所以会造成波前落后的现象，另外藉由修改凸块与沟槽配置的关系，可以有效的控制波前形状的变化情形，避免产生包风现象。
Right secret anguish issueing an abdomen reachs right bump issueing an abdomen 9, examination of clyster of agent of barium of the travel before art shows appendix is rigid or not develop 6, caecal hemicycle is slash 1, the oppressive, ministry that answer blind occupies the bump outside antrum a 2 exemple;B exceed an examination to reach bursa sex bump at explore of right flank ministry 2, solid sex is inhomogenous bump 1, the others shows without unusual;CT examination shape of bursa of west region issueing an abdomen is occupied 6 times 2, appendix is thick 1 long, local bowel wall adds the ministry that answer blind thick 1, sex of right fruit issueing an abdomen is occupied 1, the others did not see 4 times unusual.
右下腹隐痛及右下腹肿块9例，术前行钡剂灌肠检查显示阑尾僵直或不显影6例，盲肠半圆形迹1例，腔外肿块压迫、回盲部占位2例；B超检查于右侧腹部探及囊性肿块2例，实性不均匀肿块1例，其余6例无异常；CT检查显示右下腹区囊状占位2例，阑尾粗长1例，回盲部局部肠壁增厚1例，右下腹实性占位1例，其余4例未见异常。
If the height of bump is higher, the radius of bump is smaller, and the thickness of wire , substrate and chip is thicker, the strain of package without underfill is smaller. If the height of bump is shorter, the radius of bump is bigger, the thickness of wire is thinner, and the thickness of substrate and chip is thicker, the strain of package with underfill is smaller.
在应变方面，较高的凸块高度，较小的凸块半径，较厚的线路、基板和晶片厚度将对未填胶构装体有较小的应变值；另外较矮的凸块高度，较大的凸块半径，较薄的线路，较厚的基板和晶片厚度将对填胶构装体有较小的应变值。
I Tuopu shock absorber plant for Wuxi Co., Ltd., Zhangjiagang City-Long damper Limited, Jiangxi long value Technology Co., Ltd, Wuxi Hua shock absorber Ltd., Wuxi Rongchang Power Machinery Co., Ltd., Wuxi Che-hung acoustic shock absorber Ltd., Shun-machine factory in Wuxi, Wuxi Zhenhua Motorcycle Co., Ltd. in Wuxi San shock absorber, Wuxi St. Di shock absorber Ltd., Wuxi Jiangnan shock absorber Ltd., Nanyang in Henan Mopei, Haimen Warwick Machinery Co., Ltd. supporting services, and year after year on their superior quality of supporting companies
我厂为无锡拓普减震器有限公司、张家港市振龙减震器有限公司、江西长衡科技有限公司、无锡华胜减震器有限公司、无锡荣昌电力机械有限公司、无锡鸿声减震器有限公司、无锡惠顺机械厂、无锡振华机车有限公司、无锡国圣减震器有限公司、无锡圣迪减震器有限公司、无锡江南减震器有限公司、河南南阳摩配、海门华威机械有限公司配套服务，并连年评它们的质量优胜配套公司
The some machine fixes the factory machine processes the cartful a low pressure goes together with to give or get an electric shock system and cars change to give or get an electric shock a design Chinese summary: This design is the design that some cartful to passes to the some machine processing plant a low pressure for changing giving or get an electric shock with first processing car go together with to give or get an electric shock the system, make stronger" factory power supply and protect after the electricity" and some related and curricular theories knowledge, study with control the basic method that factory( change to give or get an electric shock) electricity part design, foster independent analysis in ego with the basic technical ability that problem-solving work ability and actual engineering's design, from but proceed this time graduate designs, for our four hearses of the study draw a satisfactory period.
那位老大帮帮忙，专业翻译。有分。帮忙翻译以下内容：某机修厂机械加工一车间低压配电系统及车间变电所设计中文摘要：本设计是通过对某机械加工厂的某一车间变电所和一个加工车间的低压配电系统的设计，来巩固"工厂供电及继电保护"及一些相关课程的理论知识，学习和掌握工厂电气部分设计的基本方法，培养自我独立分析和解决问题的工作能力及实际工程设计的基本技能，从而进行了此次的毕业设计，为我们四年的学习画上一个圆满的句号。
Chapter 2 establishes a helicoid model of the 3D curved shock surface, which is a fundamental means for investigating the sweep of the 3D shock surface In chapter 3, the first step is to make definitions and detail concepts about various viewpoints of shock surface sweep. Secondly, those sweep angles of the 3D shock are calculated. After that, with the aid of the helicoid model, two general structure similarity variables are derived which are independent of any model, and their importance in shock structure investigations is discussed.
第三章首先给出激波曲面掠的各种基本概念，计算相应掠角；又借助螺面模型得到一般性的掠相似参数，并分析了它在激波结构研究中的意义，设想了激波气动掠参数的测量方法；第四章依据螺面模型探讨了前缘曲线掠与前缘激波曲面掠的关系，可能存在的均匀激波曲面、简单非均匀激波曲面和它们的运动学设计方法，其中得到一些很有用的概念。
Much progress has been made in recent years through studying septic shock,however brain injury is rarely involved.This study takes the models of endotoxin-shock rats as research object to simulate septic shock.The study aims are to explore anomalous signal transduction in brain injury caused by septic shock and the effect of Sini Decoction in the process;define the molecular and cellular mechanisms of reviving yang for resuscitation method used to prevent and treat brain injury in septic shock and establish the scientific foundation for modernizing traditional Chinese medicine.
研究目的：1。明确内毒素休克后脑损伤组织中炎症介质水平，中性粒细胞和脑血管内皮细胞等细胞表面黏附分子表达情况，脑血管平滑肌细胞、神经胶质细胞和神经细胞对细胞外炎症介质刺激产生的功能代谢变化以及结构改变等三者之间的规律性关系。2。
The some machine fixes the factory machine processes the cartful a low pressure goes together with to give or get an electric shock system and cars change to give or get an electric shock a design Chinese summary: This design is the design that some cartful to passes to the some machine processing plant a low pressure for changing giving or get an electric shock with first processing car go together with to give or get an electric shock the system, make stronger" factory power supply and protect after the electricity" and some related and curricular theories knowledge, study with control the basic method that factory( change to give or get an electric shock) electricity part design, foster independent analysis in ego with the basic technical ability that problem-solving work ability and actual engineering's design, from but proceed this time graduate designs, for our four hearses of the study draw a satisfactory period.
那位老大帮帮忙，专业翻译。有分。帮忙翻译以下内容：某机修厂机械加工一车间低压配电系统及车间变电所设计中文摘要：本设计是通过对某机械加工厂的某一车间变电所和一个加工车间的低压配电系统的设计，来巩固&工厂供电及继电保护&及一些相关课程的理论知识，学习和掌握工厂电气部分设计的基本方法，培养自我独立分析和解决问题的工作能力及实际工程设计的基本技能，从而进行了此次的毕业设计，为我们四年的学习画上一个圆满的句号。
